GANSAT TEKNOLOJİTechnical Datasheet
www.gansat.com.tr
sales@gansat.com.tr · +90 (541) 276 39 46
sales@gansat.com.tr · +90 (541) 276 39 46
100W L-to-Ku Band Block Up Converter is based on GaN technology. Its high-efficiency GaN solid-state design provides the highest performance for satellite uplink applications.
GANSAT-100WKU
| RF Frequency | 13.75 – 14.50 GHz |
| Local Oscillator | 12.80 GHz |
| Output Power | 100W (+50 dBm) |
| IF Connector | N-type or F-type |
| Power Supply | 220V 50Hz AC, 500W typ. |
| Output Interface | WR-75 G |
| Gain | 68 dB min, 73 dB nominal |
| IMD3 (Two Tones) | -26 dBc max. 2 signals 5 MHz apart at P-LINEAR |
| L.O. Leakage | -45 dBm max |
| Spurious | -50 dBc max |
| Spectral Regrowth | -30 dBc (QPSK at 1.5x and OQPSK at 1.0x symbol rate offset with 2dB back-off) |
| External Reference Requirement | Via IF cable — 10 MHz (sine-wave), -5 to +5 dBm @ input port |
| TX Gain Variation / Temperature Stability | ± 0.5 dB over 40 MHz / ± 1.8 dB over full band / ± 1.5 dB typ., ± 1.8 dB max. |
| Phase Noise | -55 dBc/Hz @ 10 Hz · -65 @ 100 Hz · -75 @ 1 kHz · -85 @ 10 kHz · -95 @ 100 kHz · -115 @ 1 MHz |
| Noise Power Density TX / RX | -80 dBm/Hz (max) / -125 dBm/Hz (max) |
| Noise Figure | 15 dB max |
| Input / Output V.S.W.R. | 2:1 max |
| Mute | SSPA Shutdown on L.O. Unlock |
| Operating / Storage Temperature | -40°C to +55°C / -55°C to +85°C |
| Dimensions | 310 (L) × 240 (W) × 210 (H) mm — 12.2" × 9.45" × 8.25" |
| Weight | 12.75 kg (28.1 lbs) max |
GANSAT-100WEXTKU
| RF Frequency | 13.75 – 14.75 GHz |
| Local Oscillator | 12.80 GHz |
| Output Power | 100W (+50 dBm) |
| IF Connector | N-type or F-type |
| Power Supply | 220V 50Hz AC, 500W typ. |
| Output Interface | WR-75 G |
| Gain | 68 dB min, 73 dB nominal |
| IMD3 (Two Tones) | -26 dBc max. 2 signals 5 MHz apart at P-LINEAR |
| L.O. Leakage | -45 dBm max |
| Spurious | -50 dBc max |
| Spectral Regrowth | -30 dBc (QPSK at 1.5x and OQPSK at 1.0x symbol rate offset with 2dB back-off) |
| External Reference Requirement | Via IF cable — 10 MHz (sine-wave), -5 to +5 dBm @ input port |
| TX Gain Variation / Temperature Stability | ± 0.5 dB over 40 MHz / ± 1.8 dB over full band / ± 1.5 dB typ., ± 1.8 dB max. |
| Phase Noise | -55 dBc/Hz @ 10 Hz · -65 @ 100 Hz · -75 @ 1 kHz · -85 @ 10 kHz · -95 @ 100 kHz · -115 @ 1 MHz |
| Noise Power Density TX / RX | -80 dBm/Hz (max) / -125 dBm/Hz (max) |
| Noise Figure | 15 dB max |
| Input / Output V.S.W.R. | 2:1 max |
| Mute | SSPA Shutdown on L.O. Unlock |
| Operating / Storage Temperature | -40°C to +55°C / -55°C to +85°C |
| Dimensions | 310 (L) × 240 (W) × 210 (H) mm — 12.2" × 9.45" × 8.25" |
| Weight | 12.75 kg (28.1 lbs) max |
The GANSAT-100WKU delivers 100W of Ku-Band RF power with GaN technology for fixed and mobile satellite communication infrastructure. Weighing 12.75 kg and powered from 220V/110V AC mains, it is suited for VSAT hubs, coastal stations, and air-to-ground communication systems.
With low phase noise and IMD performance, the GANSAT-100WKU is well suited to commercial Ku-Band satellite uplink applications. Standard KU (13.75–14.50 GHz) and Extended KU (13.75–14.75 GHz) versions are available to match regional satellite access requirements.
A 100W Ku-Band BUC is used for VSAT hub stations, coastal communication systems, air-to-ground links, and fixed broadband satellite uplink applications. It combines high EIRP capability with a compact form factor for commercial satellite communications.
GaN transistors provide higher power density, better thermal management, and lower power consumption compared to GaAs or LDMOS designs at the same power class. This allows the GANSAT-100WKU to deliver 100W output at 12.75 kg while maintaining long-term reliability.
The Standard KU version (GANSAT-100WKU) covers 13.75–14.50 GHz, while the Extended KU version (GANSAT-100WEXTKU) extends to 13.75–14.75 GHz. The Extended KU band supports additional transponder capacity used by some satellite operators for regional coverage.